DH+/RIO using ControlLogix

DH+/RIO using ControlLogix

Duration: 1 day      $885.00

Course Outline

Module 1

This module provides an introduction of the capabilities and applications that the 1756-DHRIO module can provide. The student will be able to configure a 1756-DHRIO module using rotary DIP switches to meet their application. Next the student will be able to program message instructions for data transfers between ControlLogix processors and legacy platforms, such as the PLC-5 family and the SLC-5/04. You will also use the 1756-DHRIO module to program data transfers between ControlLogix processors and scan discrete remote I/O adapters. To conclude the module students will configure a ControlLogix message instruction to perform Block Transfer Read and Write operations to Remote I/O devices.

Lessons

  1. Introduction
  2. Hardware and Cabling
  3. DH+_Communications
  4. Remote I/O Communications
  5. Block Transfer Communications

Course Available

Fill out the form below:

    Request a Course in your areaRequest an On-site Quote if you have a minimum of four (4) people

    Full Name (required)

    Company (required)

    Address (required)

    City (required)

    State/Province (required)

    Email Address (required)

    Phone Number (required)

    Product Brand (required)
    Allen-BradleySiemensOmronModiconMitsubishiWonderwareBeckhoffOther

    If "other" selected please name:

    Comments or Questions

    PROFIBUS using ControlLogix

    PROFIBUS using ControlLogix

    Duration: 1 day      $885.00

    Course Outline

    Module 1

    This module covers all aspects for using PROFIBUS with ControlLogix and the Woodhead SST PROFIBUS card. An overview is given to provide the terminology and advantages of PROFIBUS. The hardware side is reviewed including cabling, connectors and termination. Details about the SST PROFIBUS scanner card and the SST Configuration Tool provide the student with the knowledge to configure and begin using the module. Finally, helpful diagnostic troubleshooting tips are given for fixing errors on the network.

    Lessons

    1. Overview
    2. Cabling
    3. SST PROFIBUS Scanner
    4. SST Configuration Tool
    5. Diagnostics

    Course Available

    Fill out the form below:

      Request a Course in your areaRequest an On-site Quote if you have a minimum of four (4) people

      Full Name (required)

      Company (required)

      Address (required)

      City (required)

      State/Province (required)

      Email Address (required)

      Phone Number (required)

      Product Brand (required)
      Allen-BradleySiemensOmronModiconMitsubishiWonderwareBeckhoffOther

      If "other" selected please name:

      Comments or Questions

      PROFIBUS using Siemens S7-300

      PROFIBUS using Siemens
      S7-300

      (Modules 1-2)      $1385.00
      Duration: 2 days

      Course Outline

       

      Module 1

      This module begins with an introduction of the training demo and then addressing methods available with the S7 family is covered. Next, there is a PROFIBUS overview followed by PROFIBUS Cabling. Students will receive a basic understanding of the function of GSD files. Students will learn how to configure, add and define slaves. To complete the module, the student will be able to apply the error OB's that apply to PROFIBUS communication.

      Lessons

      1. Introduction to the Demo
      2. Addressing Methods
      3. Overview
      4. Cabling
      5. GSD Files
      6. Configuring and Adding Slaves
      7. OB82 OB86 and OB122

      Module 2

      In this module the student will be able to configure remote I/O devices on PROFIBUS, troubleshoot I/O communication faults and use FC125 to program diagnostic functions. Next, the Sync/freeze commands are covered, as well as, deactivating DP I/O and reading diagnostic data from a slave. To conclude the module using a CPU as a DP slave is explored.

      Lessons

      1. Remote I/O - Diagnostics
      2. Remote I/O - FC125
      3. Sync/Freeze Deactivating
      4. CPU as a Slave

      Course Available

      Fill out the form below:

        Request a Course in your areaRequest an On-site Quote if you have a minimum of four (4) people

        Full Name (required)

        Company (required)

        Address (required)

        City (required)

        State/Province (required)

        Email Address (required)

        Phone Number (required)

        Product Brand (required)
        Allen-BradleySiemensOmronModiconMitsubishiWonderwareBeckhoffOther

        If "other" selected please name:

        Comments or Questions

        ControlNet using ControlLogix

        ControlNet using ControlLogix

        Duration: 1 day      $885.00

        Course Outline

        Module 1

        This module provides the student with an introduction of what ControlNet is; including terminology and the tools required to work with ControlNet. The student will learn about installation procedures required for ControlNet Hardware and Cabling and Remote I/O.  To conclude, the message instruction used for unscheduled inter-processor communications and finally scheduled inter-processor communications will be covered.

        1. Introduction
        2. Hardware and Cabling
        3. Remote I/O
        4. The MSG Instruction
        5. Produced and Consumed Tags
        6. Additional Reference

        Course Available

        Fill out the form below:

          Request a Course in your areaRequest an On-site Quote if you have a minimum of four (4) people

          Full Name (required)

          Company (required)

          Address (required)

          City (required)

          State/Province (required)

          Email Address (required)

          Phone Number (required)

          Product Brand (required)
          Allen-BradleySiemensOmronModiconMitsubishiWonderwareBeckhoffOther

          If "other" selected please name:

          Comments or Questions

          DeviceNet using Allen Bradley ControlLogix

          DeviceNet/IP using Allen Bradley ControlLogix

          Duration: 1 day      $885.00

          Course Outline

          Module 1

          This module provides an overview of what DeviceNet is; including terminology, tools and rules required to work with DeviceNet. The student will learn about a DeviceNet cable system and wiring and how it is constructed. The RSNetworx software is reviewed along with how to use the help system to assist you in troubleshooting a network. Next is an introduction to ControlLogix followed by Scanlist and to conclude the module tips on troubleshooting.

          Lessons

          1. Introduction
          2. RSNetworx
          3. ControlLogix Introduction
          4. Scanlist
          5. Troubleshooting

          Course Available

          Fill out the form below:

            Request a Course in your areaRequest an On-site Quote if you have a minimum of four (4) people

            Full Name (required)

            Company (required)

            Address (required)

            City (required)

            State/Province (required)

            Email Address (required)

            Phone Number (required)

            Product Brand (required)
            Allen-BradleySiemensOmronModiconMitsubishiWonderwareBeckhoffOther

            If "other" selected please name:

            Comments or Questions

            EtherNet/IP using Allen Bradley ControlLogix

            EtherNet/IP using Allen Bradley ControlLogix

            Duration: 1 day      $885.00

            Course Outline

            Module 1

            This module provides the student with an introduction of what EtherNet is including how the devices are grouped for industrial applications. The student will learn about EtherNet Hardware and Cabling, IP addressing and software tools. The student will be introduced to Remote EtherNet I/O, the message instruction and inter-processor communications using EtherNet as the medium.

            Lessons

            1. Introduction
            2. Hardware and Cabling
            3. IP Addressing
            4. Software Tools
            5. EtherNet I/O
            6. The Message Instruction
            7. Produced and Consumed Tags

            Course Available

            Fill out the form below:

              Request a Course in your areaRequest an On-site Quote if you have a minimum of four (4) people

              Full Name (required)

              Company (required)

              Address (required)

              City (required)

              State/Province (required)

              Email Address (required)

              Phone Number (required)

              Product Brand (required)
              Allen-BradleySiemensOmronModiconMitsubishiWonderwareBeckhoffOther

              If "other" selected please name:

              Comments or Questions